PS5 trigger test (L2 and R2)
Is your R2 pressing on its own or does L2 stop short? Test your DualSense triggers in 3 seconds. Free.
Waiting for your controller
Connect it over Bluetooth or with a cable and press any button.
Nothing leaves your browser.
Which part is failing?
Answer 5 questions about your trigger. Trigger Doctor’s AI, using your test readings, tells you which part is failing, how urgent it is and what it costs to repair.
Included with a PLEYX Pro subscription, which you buy in the app with the same account. Here, you just sign in with it.
The essentials
The test measures how much pressure each trigger registers at rest and how far it goes when you press it all the way. If it doesn’t reach the end when you press it, the problem is mechanical (spring, gear or something blocking it), not software.
- Under 5%Normal: the trigger returns to its resting position.
- 5 to 9%Mild drift. Clean it and raise its dead zone in the game.
- 10% or moreCritical drift. If nothing brings it down, it’s usually the spring or the sensor.
The complete guide
What problems it detects
- Drift: the trigger registers pressure at rest, as if you were accelerating or aiming on your own.
- Sticky trigger: after you let go, it doesn’t fully return and keeps registering pressure.
- Incomplete travel: when you press it all the way, it doesn’t reach the end.
- It doesn’t repair anything. To find out which part is failing, there’s the PLEYX Pro AI diagnosis, right above.
Why a trigger fails
- The spring. It weakens or slips out of place and the trigger doesn’t fully return: it registers pressure at rest or stays pressed down.
- The sensor. It reads the trigger’s position. If it wears out or gets dirty, it registers pressure without you touching it or doesn’t reach the end.
- The adaptive trigger motor and gears. They create the resistance. If they fail, the trigger feels loose, makes noise or gets stuck halfway through its travel.
- The ribbon cable that connects the trigger to the board. If it comes loose or gets damaged, the trigger stops responding.
What to try before opening the controller
- Turn off adaptive triggers. On your PS5, go to Settings › Accessories › Controllers (General) and set Trigger Effect Intensity to Off. If the trigger works fine that way, the problem is in the adaptive trigger motor or gears, not the sensor.
- Reset the controller. With the console off, insert a paperclip into the small hole on the back and hold the reset button for about 5 seconds.
- Clean the trigger slot. With the controller off, blow compressed air into the slot while you press and release the trigger several times. If it sticks, it may be dirt or a spilled drink.
- Raise the trigger’s dead zone in the game, if the game has that setting. It doesn’t fix the part, but it stops the game from reading phantom pressure.
If nothing changes, the AI diagnosis tells you which part is failing. To replace it, find a technician you trust.
What about the DualShock 4?
The PS4 DualShock 4 has no adaptive triggers, but its L2 and R2 are also analog and can drift. This test can read them just the same. In the app, Trigger Doctor is only for the PS5 DualSense. For the DualShock 4’s sticks, use the drift test.
Frequently asked questions
What is trigger drift?
It’s when L2 or R2 registers pressure even though you aren’t touching it. In games it feels like you’re accelerating or aiming on your own. It usually comes from a worn sensor or a spring that doesn’t fully return.
Why isn’t my R2 working?
If it doesn’t respond at all, it’s usually the ribbon cable that connects it to the board, or the sensor. If it responds only partly, it’s the spring or dirt. Press the trigger all the way in the test: if it doesn’t reach the end of its travel, the problem is mechanical.
Why does my L2 get stuck?
It’s usually the adaptive trigger mechanism (motor or gear) or dirt. Set the trigger effect intensity to Off: if it stops getting stuck, the problem is in that mechanism.
How do I turn off adaptive triggers?
On your PS5, go to Settings › Accessories › Controllers (General) and set Trigger Effect Intensity to Off. Some games also have their own option in their settings.
See all 7 questions
How much trigger drift is normal?
At rest, a trigger should read under 5%. Between 5 and 10% there’s mild drift; from 10% up, the drift is critical. These are the same thresholds Trigger Doctor uses in the PLEYX app.
Does it work with the DualShock 4?
It can read its triggers, but the test is designed for the PS5 DualSense: the DualShock 4 has no adaptive triggers, so in the app this tool is PS5 only.
Does this tool fix the triggers?
No. It measures whether a trigger registers pressure at rest and how far it goes when you press it. To find out which part is failing (sensor, spring, gear, cable or motor), there’s the PLEYX Pro AI diagnosis, right here or in the app.